www.Deepstar-Productions.com



Sponsored By:





Hello everybody

Winter up here and I´m going to fix my scoot for next summer

Modifications:
homemade 12bar
Special made gastank
Team 10 handlebar
Footbrake
DMP 285mm Brakedisc
All unnecessary electrical components removed
Yamaha R1 rear master cylinder
Doppler Pegs
BMX pegs for WC
BGM 40mm riser
BGM Rearshocker

Setup:
Polini Corsa
Polini Forrace 3
RMS Racing vev with SKF C3 Bearings
Delorto 19mm Black Edition
Polini Speedcontrol
BGM PRO clutch and Wingbell
Malossi E5 Airfilter

More modifications could come

Some pictures of how it have changed from the beginning:

Just some days after I bought it


A week or two later, now with a Leovince ZX:


In Autumn 2k5 I bought a 12 bar


This summer I painted it green and bought a nudebar:




Later on I built a new 12 bar:





Got caught by the cops and whas forced to change back all original parts in the engine (I put the tuning parts back just a day later):



A picture of how it looks now


This winter the Aerox will change a bit

For example:



UPDATE 28/11:

At last I have stopped being so lazy:





20/12: I have temporary assembled the master cylinder and hoses for the footbrake




UPDATE 2/1 2007!

Happy New Year

Bought a new radiator and got a package from S-A



Just some small stuff:


Update 5/1: I have bought a R1 brake and tried the quick throttle:

R1 brake:



Quick throttle:




12/1 Got my new gastank today



UPDATE 1/2: Got my new brakedisc today and it´s BIG!



a "little" bigger :




UPDATE 8/2: Got my order from Scooter-Center yesterday:





and I have bought a new pad:


UPDATE 9/2: I took of the engine today and put on the new reedvalve



BGM reedvalve:


on place:


For the boostbottle:


my beautiful boostbottle


UPDATE 14/2: I have bought more pegs now and got some sticker from Scooter-Center:

Stickers:


Pegs:


UPDATE 19/2: The disc is on and it´s a new Pilot Sport on the rim
I have also bought a special thing to my gas tank, don´t know the english name for it

New Tire:




UPDATE 4/3:I have changed piston now and my scoot is on both wheels for the first time this winter now

My cylinder:


The new piston:


Finally on wheels again :


The front:


UPDATE 10/4: Much has happened since my last update!
I have repaired my original throttle instead of using the quick one and I won´t use the boostbottle.
Now it is finnished! just waiting for some stickers

This little thing is also done




Stuntbase is the shit


UPDATE 25/5: I have modified my engine carter a bit
But I also found out that my clutch and wingbell are totally fucked up I have to order new ones



UPDATE 8/6: New clutch and wingbell, but also a broken engine carter:





Update 9/6: I blew my engine just one day before a show, the crank and piston are destroyed.

Piston:

[/B]

Update 15/6: New Setup!!

Corsa,Do BE, Forrace 3, Speedcontrol,RMS crank, Malossi E5 and new rear suspension


close up at the exhaust:


CORSA



UPDATE 26/6: IT´s ALIVE
Testrun will come when I got more jets so I can drive with my Malossi E5

Forrace


Update 29/6: A very nice picture of my Aerox now
And I´ve got a new sponsor that is authorized alpinestars dealer,
so I´ve got full protective gear, I already have full clothing, but it is good to have in reserve







2 pair of shoes but I will drive with these if they are not to clunsy


STAY TUNED

Nice to see how its going...
Very nice work...
Looking forward to see how the foot brake will look at the end

but dont you think that quick throttle will be a problem if stunting?

Waynder wrote (View Post): › but dont you think that quick throttle will be a problem if stunting?

No because it isn´t that quick
I bought the one that is 148 degrees and I think it´s almost like the original

Aerox_Jonne wrote (View Post): › and I think it´s almost like the original

then whats the point of havin it?
i think that is better on stunt bike/scooter to have sl less parts as possbile... and the ones that are there to be as simple as possible...

my original is broken, thats the reason

Update!

UPDATE!

i*we orderd the same disc =)

will be here in few days....


rox looks nice

still cant wait to see how will you built pad for foot brake

Sick front-disc, were did you get that one from?

its avalible via scooter-center.com

veeeery nice disc!
are you going to paint it green like your scooter or will it stay blue?

nice project
i think waynder will like this color,hehe
beautiful disc

omg...the disc is huge...can't wait to see all that in action

how much did you pay for that disc?

pichilo wrote (View Post): › how much did you pay for that disc?

i think the price is 1around 138 €