| Author |
Message |
climax 50 Points
|
Hi im going to pick my new aerox up tonight and gettin my wheelie bar made tomoz hopefelly so can some one please send me the blue prints or how to make one PLZ!! ive look at the tech thing but it dont say how to make them or where to connect on.. and can soem one tell me all the parts i need for the downhill bars? and the best place to get them from  thxs.. asap |
|
|
|
 No rating
|
|
Waynder 17183 Points
|
well there are pics in KB here on stuntbase... read those carefuly and there should be no problem in making one...
|
|
_________________
Im not here to serve my bikes... My bikes are here to serve me... CRUSH KILL N DESTROY
|
|
|
No rating
|
|
climax 50 Points
|
like i said ive looked though there but i can see nothing that tells you about making them :\
|
|
|
|
|
No rating
|
|
Waynder 17183 Points
|
i really dont know how to help you here... there is topic in KB where are pics for different models... and from those picture you can see example how it should look on any scooter...
show those stuff to someone who is a welder or something..he'll understand it  |
|
_________________
Im not here to serve my bikes... My bikes are here to serve me... CRUSH KILL N DESTROY
|
|
|
No rating
|
|
Aerox_Jonne 1996 Points
|
I have a simple blueprint on my twelve bar, the explanation is in swedish but I can translate it and post it if you want
|
|
|
|
|
No rating
|
|
climax 50 Points
|
yeh plz! need one badly, aerox john what size rollers do u use?
|
|
|
|
|
No rating
|
|
Aerox_Jonne 1996 Points
|
http://xs113.xs.to/xs113/07095/Ritningutantext.JPG
I hope you understand it
Every piece is 5mm thick except the piece that touch the asphalt that is 12mm.( dont know any english word word for it)
you attach it on 2 places, on the frame were the light have been and on the frame were I drew on the picture
edit: I use 4,2g rollers
|
|
|
|
|
No rating
|
|
climax 50 Points
|
very very very big thxs  saved me alot off hard work |
|
|
|
|
No rating
|
|
climax 50 Points
|
also, what do i need for downhill bars? wheres the best to get the stuff from
|
|
|
|
|
No rating
|
|
Waynder 17183 Points
|
www.scooter-attack.com
www.scooter-center.com
you need steering and holder
each of them is about 30-35€
there are different shapes and sizes...
|
|
_________________
Im not here to serve my bikes... My bikes are here to serve me... CRUSH KILL N DESTROY
|
|
|
No rating
|
|
climax 50 Points
|
dont surpose you no what is the best for a person who just started :\ any size i shoould look for :\?
|
|
|
|
|
No rating
|
|
Aerox_Jonne 1996 Points
|
it doesnīt matter!
all steering is almost the same on scooter-attack and scooter-center
|
|
|
|
|
No rating
|
|
Waynder 17183 Points
|
Aerox_Jonne wrote ( View Post): › it doesnīt matter!
all steering is almost the same on scooter-attack and scooter-center |
nop, they are not the same... i have changed few of them until i found size that fits for my needs while i was in hockenheim on scooter attack meet... |
|
_________________
Im not here to serve my bikes... My bikes are here to serve me... CRUSH KILL N DESTROY
|
|
|
No rating
|
|
Aerox_Jonne 1996 Points
|
what bars i available on s-a/s-c? TNT, doppler, metamorfosis? it canīt be that big difference between tnt and doppler?
or is it different "size" on each brand?
|
|
|
|
|
No rating
|
|
Waynder 17183 Points
|
no... u got nme wrong...
al brands are the same... but all brands make few sizes... i tested 3 TNT's... they were all different lenght...
|
|
_________________
Im not here to serve my bikes... My bikes are here to serve me... CRUSH KILL N DESTROY
|
|
|
No rating
|
|
|
|
Calendar 
Home
