Im fitting a new Doppler crank to my aerox to go with a 70cc kit im fitting aswell.I am having trouble trying to get the flywheel/generator off.Do you need a special puller tool to take it off.Help would be greatly appreciated because I don't want to try ripping it off and break it because I don't know how to take it off.Thanks

yeah..there is a special tool....


looks like this




have forgot english word for it =P

I see.A few questions.1;How does this tool work?
2; Is there anything else I could use as I have access to other puller type tools used on cars.
3; What do you guys use to take the flywheel off when ye are changing the crank?
Thanks.

1. its easy


this bigger part u screw into the flywheel... then u tight that other screw in... it will slowly go in and start pulling flywheel out... until it flips out of the magnet


2. no, not really

3. we use that tool on picture =)

ive translated it till flywheel trigger waynder .. maybe wrong cus of my bad english.

there is another way, I´ve never used the special tool cause I didn´t have the right size lol

you can hit the flywheel with a hammer, knock carefully around it and the magnet will eventually come loose

but be careful it CAN cause damage, so it´s not the safest way lol...